Dale,
FYI:
I added an option to disable the GPIO pins on the cli_control plugin's setup page. The GPIO pins are now active by default.
Regarding your suggestion to have the commands control individual pins; It is pretty complicated because the SIP's original capability was to control stations through shift registers and there is not a direct relationship between the GPIO pins and the stations. I will give it some thought as it would be a good feature.
Dan
FYI:
I added an option to disable the GPIO pins on the cli_control plugin's setup page. The GPIO pins are now active by default.
Regarding your suggestion to have the commands control individual pins; It is pretty complicated because the SIP's original capability was to control stations through shift registers and there is not a direct relationship between the GPIO pins and the stations. I will give it some thought as it would be a good feature.
Dan
<p><br></p>