Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Problem at restart
#4
(2019 May 16, 08:10 PM)Ajpul Wrote: Thanks dan for your support.

The program scheduled consist of every station of the 3 i have, running three times a day  (every 8 hours) for 5 minutes each in a sequential way. After rebooting, all stations run simultaneously for 5 mins aprox., then station 2 goes for another 5 mins and finally, the system goes in normal state, i.e., the next cycle takes place 8 hours later, as expected.

Sorry but i don't have access to Rpi at this moment, to show the program scheduled.

Maybe the problem is related to a lack of internet access, as the Rpi hasn't got internal clock?

Regards.

Yes.

Not having internet access will definitely cause timing problems.
You might be able to add a "real time clock" such as the one from Adafruit:
https://www.adafruit.com/product/3386

I have used that on a system that runs off solar power and without an internet connection.
Reply


Messages In This Thread
Problem at restart - by Ajpul - 2019 May 15, 10:00 PM
RE: Problem at restart - by dan - 2019 May 15, 11:19 PM
RE: Problem at restart - by Ajpul - 2019 May 16, 08:10 PM
RE: Problem at restart - by dan - 2019 May 17, 10:54 PM
RE: Problem at restart - by Ajpul - 2019 Aug 20, 10:38 PM
RE: Problem at restart - by Fishey1704 - 2022 Jul 24, 07:53 AM
RE: Problem at restart - by dan - 2022 Jul 24, 02:27 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)