2018 Oct 01, 01:17 AM
It sounds like you can use SIP's rain sensor feature to handle controlling your system without needing to make a plugin for that.
Go to SIP's OPTIOS page > Rain sensor and tick the box next to "Use Rain Sensor". Connect your rain sensor to pins 6 (ground) and 8.
It will stop all the relays when rain is detected.
Go to SIP's OPTIOS page > Rain sensor and tick the box next to "Use Rain Sensor". Connect your rain sensor to pins 6 (ground) and 8.
It will stop all the relays when rain is detected.