2018 Apr 02, 07:30 AM
Although you provide little information on what hardware you use, I would say power supply.
If it is the controller board then most likely you wouldn't see this issue on all ports since most boards have almost nothing in common from the circuit point of view, except the power lines.
Hopefully the system is accessible for you to check with a mulitmeter and measure what's going on, but my bet is on the psu. Capacitors have in many cases a very limited life.
--Gerard
If it is the controller board then most likely you wouldn't see this issue on all ports since most boards have almost nothing in common from the circuit point of view, except the power lines.
Hopefully the system is accessible for you to check with a mulitmeter and measure what's going on, but my bet is on the psu. Capacitors have in many cases a very limited life.
--Gerard