2017 Jun 10, 08:06 PM
(This post was last modified: 2017 Jun 10, 08:07 PM by astrogerard.)
Hi All,
Not the most sophisticated setup but here is mine.
We have a city garden with 5 separate drip sections. All is controlled by SIP, a relay board and 5 hunter valves.
Also I started to do some experimental integration with the home automation system via node-red and mqtt. More on that later.
Some pictures below
--Gerard
The electronics
![[Image: sip_setup2.jpg]](https://s11.postimg.org/4bvrpqhg3/sip_setup2.jpg)
The wet area (hopefully not too wet because everything is inside the workshop)
![[Image: valves.jpg]](https://s4.postimg.org/qsbsuiyel/valves.jpg)
The soft side of the story
![[Image: sip_node_mqtt.jpg]](https://s13.postimg.org/kavlcopbb/sip_node_mqtt.jpg)
Some experimental integration with home automation. Works fine so far
![[Image: domoticz_sip.jpg]](https://s3.postimg.org/ntmo7dkar/domoticz_sip.jpg)
Not the most sophisticated setup but here is mine.
We have a city garden with 5 separate drip sections. All is controlled by SIP, a relay board and 5 hunter valves.
Also I started to do some experimental integration with the home automation system via node-red and mqtt. More on that later.
Some pictures below
--Gerard
The electronics
The wet area (hopefully not too wet because everything is inside the workshop)
The soft side of the story
Some experimental integration with home automation. Works fine so far