2017 May 24, 11:51 PM
This looks like a pretty old bug. I tested several older versions of SIP and it goes back to at least version 3.2.5.
The durations are correct when the program runs from the start time setting. If you set the start time for 1 minute in the future the program will start with the correct durations. It is only when the "run now" button in clicked that the durations are wrong.
The other problem is that if you try to set the program for "single pass" that setting is not saved. You can work around this by leaving the setting as "recurring" and set Every = 23:00 Until = 23:59
We are working on the problem and I will update this thread when it is fixed.
Dan
The durations are correct when the program runs from the start time setting. If you set the start time for 1 minute in the future the program will start with the correct durations. It is only when the "run now" button in clicked that the durations are wrong.
The other problem is that if you try to set the program for "single pass" that setting is not saved. You can work around this by leaving the setting as "recurring" and set Every = 23:00 Until = 23:59
We are working on the problem and I will update this thread when it is fixed.
Dan