Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
24 VAC valves not being activated
#3
(2017 May 13, 04:52 PM)Dan, Wrote: Many thanks for your prompt response. Actually I do have both power cables connected (RPi and OSPI). So I guess that is not the issue!!

I am checking if there are libraries missing in the RPi. If any idea of specific library/package installation that I may be missing and I should check, will be very appreciated!!

Thank you!!

elongo



This is the first I have heard of this.

I checked the OSPI board description on the OpanSprinkler web site and found this:

"Also, if you plan to use RPi 3: due to the power consumption of RPi 3, you may need an additional USB adapter to power RPi 3 directly through its microUSB port."

Even though the unified software can switch the valves the SIP software may require more power.

Have you tried using a USB power adapter with the Pi?

There does not seem to be any changes in the OSPi board that would cause SIP not to work.

Dan
Reply


Messages In This Thread
24 VAC valves not being activated - by elongo - 2017 May 13, 02:17 PM
RE: 24 VAC valves not being activated - by dan - 2017 May 13, 04:52 PM
RE: 24 VAC valves not being activated - by elongo - 2017 May 13, 05:08 PM
RE: 24 VAC valves not being activated - by dan - 2017 May 13, 08:27 PM
RE: 24 VAC valves not being activated - by dan - 2017 May 14, 04:08 PM
RE: 24 VAC valves not being activated - by elongo - 2017 May 15, 11:23 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)