response time webserver high! and ..

[takezo]

Hi,
First issue has been a known problem problem. I am looking for a solution.
Second issue:
I will need more information abut your setup to find the problem.
I am guessing you have the pump on a station that is set as Master and the station that runs the water valve is set to Activate master on the Stations page.
Are you using a relay board or the OpanSprinkler board?
What version of the software are you using?
Is there any thing else about program-1 that is different from the other programs?
Do other programs/stations use the pump?
When the pump does not start, does the water valve operate or does nothing happen?
Also, please try starting the software manually from the console:

Code:

sudo service sip stop
cd SIP
sudo python sip.py

Then look for any error message in the console.

hi Dan!!! thanks for your soon answer. There is any way to redirect output log of service sip that start at run to a file to see what happens?

because the problem only happens if I reboot the system . After stop the service and start again everything works fine!