2017 Jan 09, 01:20 AM
(2017 Jan 07, 08:27 PM)dan Wrote: I added a feature to update the home page automatically when the rain sensor state changes.
Dan
Thanks Dan,
That works a treat. Great effort!!!.
I think the logic of the Normally Open setting is still reversed, assuming 'my' logic is not arse about....
e.g. with Use Rain Sensor ticked and Normally Open unticked- I get permanent Rain Sensed with nothing connected to pin 8.
If I s/c pin 8 to Grnd (Grnd = pin 6 in my case) the status swaps to No Rain Sensed.....
If I check (select) the Normally Open setting, the effect is reversed.
I now know some of the updating is definitely a client issue.
I discovered that IE 11 does not autoupdate some fields - like the On timer countdown on an active Station on the home page. IE updates the seconds on the clock fine.
Using Chrome and Firefox happily updates both On timers and clock seconds.... begone IE!
I'l stick to FF from now on.
Thanks again for the support.
Bob