Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
installation fails
#11
(2024 Dec 31, 02:24 PM)mrbeezer@gmail.com Wrote:
(2024 Dec 30, 03:56 PM)dan Wrote:
(2024 Dec 28, 06:23 PM)mrbeezer@gmail.com Wrote:
(2024 Dec 24, 03:32 PM)dan Wrote:
(2024 Dec 23, 03:13 PM)mrbeezer@gmail.com Wrote: Dan, still having the same issue.  I reinstalled SIP per your instructions. Also, when doing an update/upgrade I get:

W: http://raspbian.raspberrypi.com/raspbian.../InRelease: Key is stored in legacy trusted.gpg keyring (/etc/apt/trusted.gpg), see the DEPRECATION section in apt-key(8) for details.

When I run sudo sip_service.sh i get command not found. The file is present.
Sorry, that should be sudo ./sip_service

Dan I had to use sudo bash sip_service.sh to get the script to run ./sip_service would not execute.  After the script copleted, I have no sip.service in the SIP diectory.
The sip.service file should be located at /etc/systemd/system/.
If the script worked correctly SIP should start automatically after a reboot.
You could also test using the command
Code:
systemctl status sip

Thanks Dan, I appreciate your responses!
Here is the reuslt:
sip.service - SIP for Python3
    Loaded: loaded (/etc/systemd/system/sip.service; enabled; preset: enabled)
    Active: failed (Result: exit-code) since Sat 2024-12-28 10:47:00 MST; 2 da>
  Duration: 10.450s
  Main PID: 674 (code=exited, status=1/FAILURE)
        CPU: 2.315s

Dec 28 10:46:59 SIP sip[674]:    import RPi.GPIO as GPIO
Dec 28 10:46:59 SIP sip[674]:  File "/usr/lib/python3/dist-packages/RPi/GPIO/_>
Dec 28 10:46:59 SIP sip[674]:    RPI_INFO = _get_rpi_info()
Dec 28 10:46:59 SIP sip[674]:                ^^^^^^^^^^^^^^^
Dec 28 10:46:59 SIP sip[674]:  File "/usr/lib/python3/dist-packages/RPi/GPIO/_>
Dec 28 10:46:59 SIP sip[674]:    raise NotImplementedError(
Dec 28 10:46:59 SIP sip[674]: NotImplementedError: This module does not underst>
Dec 28 10:47:00 SIP systemd[1]: sip.service: Main process exited, code=exited, >
Dec 28 10:47:00 SIP systemd[1]: sip.service: Failed with result 'exit-code'.
Dec 28 10:47:00 SIP systemd[1]: sip.service: Consumed 2.315s CPU time.
lines 1-17/17 (END)

I continue to get this error.

Finally!   I reinstalled GPIO3 and it loaded successfully.  Now i just have a relay stuck on.

Thanks for your help!
Reply


Messages In This Thread
installation fails - by mrbeezer@gmail.com - 2024 Nov 20, 02:34 AM
RE: installation fails - by dan - 2024 Nov 20, 02:49 PM
RE: installation fails - by dan - 2024 Nov 20, 05:45 PM
RE: installation fails - by dan - 2024 Nov 20, 06:02 PM
RE: installation fails - by dan - 2024 Nov 20, 06:52 PM
RE: installation fails - by mrbeezer@gmail.com - 2024 Dec 23, 03:13 PM
RE: installation fails - by dan - 2024 Dec 24, 03:32 PM
RE: installation fails - by mrbeezer@gmail.com - 2024 Dec 28, 06:23 PM
RE: installation fails - by dan - 2024 Dec 30, 03:56 PM
RE: installation fails - by mrbeezer@gmail.com - 2024 Dec 31, 02:24 PM
RE: installation fails - by mrbeezer@gmail.com - 2025 Jan 10, 01:04 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)