Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Using moisture sensors to control programs
#13
I have been working with these moisture sensors for about 2 years:
https://www.irrometer.com/sensors.html#wm

The strategy I have been using is to check the moisture in a zone every 15 minutes and when the moisture level drops below a set point (depending on the crop) irrigation is started for a brief period.

I am using drip irrigation for vegetables and this may not be the best for lawns with sprinkler irrigation.

Dan
<p><br></p>
Reply


Messages In This Thread
RE: Using moisture sensors to control programs - by dan - 2024 Jan 21, 04:44 PM

Forum Jump:


Users browsing this thread: 16 Guest(s)