2016 Jun 09, 02:48 AM
(2016 Jun 06, 06:08 PM)dan Wrote: I tried adding a new program with the "single pass" setting and it saved the setting as expected. When I opened the program for editing it still had the "single pass" setting. version 3.1.46.
You can achieve a single pass with the "Recurring" setting by setting "Every" to 23h, 59min. This will allow the program to run only once per day.
What really worked for me to get a "single pass" program is to set:
"Until" = "Start time" + "Duration"
and "Every" > "Duration".
Toggling the "Single Pass / Recurring" button didn't work.
Thanks.