2021 Jun 27, 05:02 PM
(This post was last modified: 2021 Jun 27, 05:16 PM by HereComesTheRain.)
(2021 Jun 27, 04:43 PM)dan Wrote: After enabling the plugin you should see a new "shutdown button" line in the drop-down menu when you click the PLUGINS button. clicking that line should open a page with the "stop SIP" button. clicking that button runs the "poweroff" command to stop any running software so that you can safely unplug the pi.
It must not be enabled.
The only thing that shows up is MANAGE PLUGINS and SYSTEM UPDATE.
There is a check mark in the enabled column for the shutdown_button.
Tried on iOS, Mac OS Safari and Firefox.
Looking in /home/pi/SIP/plugins and found shutdown_button.py and shutdown_button.pyc and in /home/pi/SIP/plugins/manifests found shutdown_button.manifest.
Have rebooted the Pi, I have cleared cookies and cache, I have quit browsers.
Will try deleting the shutdown plugin and reinstalling.
Disabling, deleting and reinstalling the shutdown_button did not resolve the issue.
(2021 Jun 06, 02:23 PM)dan Wrote: You can use jumper wires. They can be made from 14 gauge hookup wire or you can use wires from a jumper wire kit like:
https://www.amazon.com/AUSTOR-Lengths-As...6522&psc=1
Here is an example:
@dan I just noticed in the photo you posted that there is no jumper wire between E and F between the second and third SHIFT REGISTER.
Is that the correct configuration and if so should I remove them from my configuration?
If it is removed I do not see how the first OPTOCOUPLER of each of the RELAY MODULES could be activated.
Please view photo in post #64