2020 Dec 27, 10:30 PM
(2020 Dec 27, 10:01 PM)astrogerard Wrote: Since you are a RPi and mqtt enthousiast (like me ) you could also add Node-Red to the Pi and add/modify the mqtt traffic. I do the same to interface SIP with my home automation system. Works great.
--Gerard
Certainly, point taken! I'll be diving into node-red soon to work with the mqtt traffic, and I might do the zone-to-pump assignments there.
For the moment, I'd like to do as much config in SIP as possible, since I have a nice interface here.
But in the end, I might set up a node red / grafana control panel to do the assignments. Still working it out.
A commercial irrigation controller will have a zone config page, where a zone can be assigned to one of multiple pumps.
That would be cool in SIP, but if I'm the only one that cares about it, I will figure it out elsewhere, like node red