What happened to flow_sensors

[hamhog]

Reading forum about adding in flow sensor to SIP and i see flow_sensor.py has been deleted. Just curious why this was done as i could use a plugin for flow.
Bruce

[dan]

There was a contributor who developed the flow meter code for SIP.

He needed to make some changes to the core SIP code so he forked the SIP project and updated that as a separate project.

You can follow the discussion on Github:
https://github.com/Dan-in-CA/SIP/issues/143

His fork is at:
https://github.com/DaveSprague/SIPdev

[hamhog]

Thanks for the updated info.
I have loaded Dave Sprague fork and loaded the flow sensor plugin.
When ever I make changes to the flow sensor settings to Arduino-serial and hit submit I get
"internal server error".
Any ideas why I should get this error?
Bruce

[dan]

Since that is a separate fork and David made some changes to the core SIP program I can't say what may be causing the problem.

I would suggest you open an issue on the flow sensor repo on GitHub.

[hamhog]

Since that is a separate fork and David made some changes to the core SIP program I can't say what may be causing the problem.

I would suggest you open an issue on the flow sensor repo on GitHub.

Yes I just did that on the GitHub repo. Thank you.