+- SIP (https://nosack.com/sipforum)
+-- Forum: SIP (Sustainable Irrigation Platform) (https://nosack.com/sipforum/forumdisplay.php?fid=1)
+--- Forum: Report a problem (https://nosack.com/sipforum/forumdisplay.php?fid=9)
+--- Thread: Possible bug when deactivating a station. (/showthread.php?tid=256)
Possible bug when deactivating a station. - numero9 - 2021 Aug 31
Hi again Dan, thank you for your work and effort in creating and maintaining SIP.
The other day I had to deactivate a station due to a leak.
I noticed that despite being disabled, this station worked when programmed.
Other data:
I have a program with 3 stations. It failed both deactivating 1 of them and deactivating 2.
The disabled station does not appear on the Home screen. But in the log it does appear.
(running version: 4.1.20)
RE: Possible bug when deactivating a station. - dan - 2021 Sep 01
How did you deactivate the station?
Dan
RE: Possible bug when deactivating a station. - numero9 - 2021 Sep 01
In 'Stations' screen.
uncheking the 'Enabled' checkbox.
RE: Possible bug when deactivating a station. - dan - 2021 Sep 02
That setting controls if the station will be shown in SIP's user interface. It does not control if the station will run.
To prevent the station from running you need to set any program that controls it to off or remove it from a running program on the Program > edit page.
You could also disconnect the wire that controls that valve.
Dan
RE: Possible bug when deactivating a station. - numero9 - 2021 Sep 02
Ok,
I have already understood how the setting works.
Thank you very much Dan.