+- SIP (https://nosack.com/sipforum)
+-- Forum: SIP (Sustainable Irrigation Platform) (https://nosack.com/sipforum/forumdisplay.php?fid=1)
+--- Forum: Installation and set up questions (https://nosack.com/sipforum/forumdisplay.php?fid=2)
+--- Thread: SIP and TIAO Smart Sprinkler Pi (/showthread.php?tid=108)
SIP and TIAO Smart Sprinkler Pi - timwelch - 2017 Nov 18
Hi all,
After reading http://dan-in-ca.github.io/SIP/ I purchased a TIAO Smart Sprinkler Pi and have connected it all and setup SIP (several times). I've installed the relay_board plugin.
Station 1 works fine!
As soon as I connect any more stations Station 2 opens whenever Station 1 is switched on while none of the other stations work whatsoever.
Does anyone have any suggestions as to what I might be doing wrong?
Appreciate any help
Cheers, Tim
RE: SIP and TIAO Smart Sprinkler Pi - timwelch - 2017 Nov 18
(2017 Nov 18, 06:12 AM)timwelch Wrote: I've installed the relay_board plugin.
Turns out that you need the Relay Plugin if you are using a normal relay (like I was to begin with until the TIAO board arrived).
If you are using the TIAO board you do *NOT* need anything else installed. It just works!
Happy days.
Cheers, Tim
RE: SIP and TIAO Smart Sprinkler Pi - dan - 2017 Nov 20
Hi Tim,
Good to hear that things are working properly.
On thing that may not be immediately obvious is that you can have SIP control all 16 stations on the board.
Just go to Options > Station Handling and change the number of expansion boards from 0 to 1. Each "expansion board" increases the number of stations that SIP knows about by 8.
Dan